SpeedFactory 45 Degree Silicone Coupler 2 Inch Sumps & Baffles Significantly lighter than the standard

Significantly lighter than the standard part and features a soft resin bonnet stay to avoid scratching your bonnet

naturally aspirated applications and even more on forced induction ones

but also incorporates much more aggressive width and offset combinations to allow for a deeper dish

standard part is 22mm outer diameter and manufactured from 2mm thick steel) Can be set 15mm shorter than OEM Panhard Rod

The D Series Lite Rods were designed for the Naturally Aspirated or Low Boost Turbo build and are rated to withstand up to 450+ hp all while maintaining the weight reduction

SpeedFactory 45 Degree Silicone Coupler 2 Inch Sumps & Baffles Significantly lighter than the standardSpeedFactory is proud to offer our own line of silicone couplers. Our 4 ply Polyester reinforced silicone couplers have been made to survive serious boost applications. Manufactured to the SAE J20 specification and utilizing 4 plies of polyester, we can achieve a continuous temperature range up to +376 degrees F for direct turbo installations and have burst pressures up to over 200PSI. All of our hose products are made with a super slick outer cover