3M 3-Hole 1 Inch Spreader Nozzle - 9917 Color|Dark Green S-12478-10 Polyamide hot melt sticks

S-12478-10 Polyamide hot melt sticks use for knot filling

Remove the heat shield assembly by removing the two Phillips head screws from either side of the heat shield and the one Phillips head screw on the heat shield immediately above the loading chamber

Adhesive open time: Short

3M 3738 Technical Data Sheet (TDS)

ReacTITE 6010 can drastically reduce the need for non-adhesive fasteners like screws

3M 3-Hole 1 Inch Spreader Nozzle - 9917 Color|Dark Green S-12478-10 Polyamide hot melt sticks3M 9917 3 Hole Spreader Nozzle Overview The 3M 9917 is a nozzle that can be attached to the 3M Polygun PG II and PG II LT hot melt glue guns. Once applied, the 9917 will extrude three separate hot melt beads, a total of 1 inch in diameter. Using this nozzle is excellent when a larger surface area needs to be covered or additional bond strength is needed. Works With PG II Pneumatic Hot Melt Applicator PG II LT Pneumatic Hot Melt Applicator