Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls *Input for setup mode (optional)

*Input for setup mode (optional) This mode allows the machine to be cycled during setup and troubleshooting while maintaining the current downtime reason and without incrementing the parts count

This kit is for SmartPAC 2 with a date code (serial number) 1238XXXX or higher

This photosensor may also be compatible with some legacy Wintriss products

self-powered

or as a panel-mount for flush mounting into an existing control cabinet

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls *Input for setup mode (optional)Wintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,