M2 x 4mm Phillips Flat Head Machine screws, A2 Stainless Steel DIN 965 Coarse Thread Length:M2 x 4mm Fine Pitch: M14-1

Fine Pitch: M14-1

durable fastening

these connectors typically meet IP67: dust-tight and protected against temporary immersion (15 cm to 1 m for up to 30 minutes)

Insert each wire into the correct side of the connector

0990″) Thread Size #3-56 UNF (Fine Thread) Drive Size 5/64″ Hex (Allen) Head Type Socket Head Cap Screw (SHCS) Material 18-8 Stainless Steel (A2) Finish Passivated Stainless (as produced) Standards ASTM F837 / ASME B18

M2 x 4mm Phillips Flat Head Machine screws, A2 Stainless Steel DIN 965 Coarse Thread Length:M2 x 4mm Fine Pitch: M14-1M2 Flat Head Machine screws with Phillips Drive. Metric screws made from 18 8 Stainless Steel. When installed, screws will be flush (countersunk) and as such are measured as overall length, not thread length (see diagram). Diameter: M2 2mm Thread Size: 0. 40 Coarse (Standard) Thread Length: Countersunk screws measured 'overall length'. Drive: #1 Phillips Head (PH1) Available here Type: Flat Phillips (Type H Recess) Matching Nut & Washer: M2 Available