Simpson MBHAR3.56/14 Masonry Hanger - Skewed 45 Degrees Right, Made to Order Non-Returnable MIT/HIT I-Joist & SCL Hangers DCU screws blend seamlessly into

DCU screws blend seamlessly into the surface for a polished look every time

and chemically aggressive job sites

Reliable Load Support: Suitable for tension

Nails must be driven at an angle through the joist or truss into the header to achieve the table loads

Commercial and industrial metal roofing systems

Simpson MBHAR3.56/14 Masonry Hanger - Skewed 45 Degrees Right, Made to Order Non-Returnable MIT/HIT I-Joist & SCL Hangers DCU screws blend seamlessly intoThe MBHA is a single piece, non welded connector available for solid sawn, truss and engineered wood products. The MBHA hangers feature a G90 galvanized coating which is not designed for use with treated lumber and should not be used for exterior applications. Use all specified fasteners. NOTE: The correct fasteners installed in the correct position must be used to achieve published load values California Residents: WARNING