Wintriss Strain Links Strain link type:Strain Link (no connector) with 30' cable The Material Buckle Sensor serves

The Material Buckle Sensor serves a single purpose:  To detect buckling of the strip that occurs when material “hangs up” in the die during the feed cycle

allowing the diffuse reflective photosensor to easily detect small

For SmartPAC 2 with a date code (serial number) 1237XXXX and lower

This diffuse reflective photosensor is compatible with the following connection hardware:

Up to 8 die-mounted sensors can be wired to the 12-pin terminal block on the back of the board

Wintriss Strain Links Strain link type:Strain Link (no connector) with 30' cable The Material Buckle Sensor servesThe strain links are the press mounted force sensors used by Wintriss AutoSet 1500, 1500+, 1504+ tonnage monitors, and the AutoSetPAC and WaveFormPAC SmartPAC PRO tonnage modules. Strain Links are available in 3 different versions: With no connector wired with a 30' cable, with no connector wired with a 100' cable, or with an external Hirschmann connector (on the right in the photo). When ordering a strain link with a Hirschmann connector, you must